Bachelor of medicine, Bachelor of surgery - MBBS (Medicinae Baccalaureus and Bachelor of Surgery) is a 5.5 year expert path for which the scholars are offered the ranges in medication and surgical procedure upon a success final touch of the path. The path ambitions at supplying first-class training and education to college students to assist make contributions to the developing zone of health and remedy. The route is regulated through the medical Council of India and is spanned for 4 and 1/2 years divided into semesters, followed by means of a compulsory internship for 12 months. The syllabus, prescribed in such a way that MBBS degree holders can choose a specialisation for further majoring and practising medicine. The career specialisations for MBBS students are Nephrology, Cardiology, Gynaecology, Anaesthesiology, Organ Transplant, Endocrine, and General Surgery, etc.
BDS stands for Bachelor of Dental surgery. It is a clinical field of surgery associated with mouth and dealing with the injuries related to teeth, jaw, and gums. It is a 5 year undergraduate degree program in dentistry to prepare students for successful career as a dental health practitioner. Dental Courses comprise didactic lectures, demonstrations, group discussions, seminars, clinical work and conferences. Aspiring candidates learn about various forms of treatment including Surgical Procedures, Dental materials, Dental anatomy & Oral histology, Oral Pathology, Community Dentistry, Pedodontics, Oral Medicine & Radiology etc. which are some of the topics that are generally taught.
M.D.S. Orthodontics & Dentofacial Orthopedics is a 3 year postgraduate Dentistry Course. The Course helps to educate orthodontists who are proficient at treating the broad scope of occlusal and dento-facial malocclusions. Special emphasis is placed on diagnosis and treatment planning, growth and development, biomechanics, and occlusion, using research to help develop critical thinking and writing skills while making a significant contribution to the scientific literature. The course helps to focus on the alignment of the teeth and the dental arches: the maxilla and the mandible. The practice of this specialty includes diagnosis, prevention, interception, and correction of malocclusion and other abnormalities of the developing or mature oro-facial structures.
M.D.S. Conservative Dentistry and Endodontics or Master of Dental Surgery in Conservative Dentistry & Endodontics is a 3 year postgraduate Dentistry course. Conservative Dentistry deals with prevention and treatment of disease and injuries of the teeth, here, diseased or fractured teeth are restored with restorative materials that are biologically acceptable and aesthetically pleasing. Whereas Endodontics deals with prevention and treatment of pulp and periarticular diseases and this specialty particularly strives to save an infected tooth and maintains its integrity in the dental arch. The course is an important one that offers many career scopes for the candidates after its successful completion.
M.D.S. Oral & Maxillofacial Surgery is a 3 year postgraduate Dentistry program. Oral and Maxillofacial surgery deal with the diagnosis, surgical and adjunctive treatment of diseases, injuries and defects of the human jaws and associated oral and facial structures. It is also a surgery to treat many diseases, injuries and defects in the head, neck, face, jaws and the hard and soft tissues of the oral (mouth) and maxillofacial (jaws and face) region. The course helps to develop skilled professionals in diagnosis, surgical and adjunctive treatment of disease, injuries, defects of the human jaws and associated oral & facial structures.
MDS in Prosthodontics and Crown & Bridge is a 3 year specialty course which deals with restoration of oral function developing restoration as well as maintenance of oral function, making comfortable denture and substitution of natural teeth as well as related tissues by settled or removable artificial substitutes.
MDS in Periodontology is a 3-year post graduate program. Periodontics is the branch of dentistry that involves the concepts and processes of rearrangement of teeth suffering from ailments of the supporting and contributing structures of the teeth including the gums, cementum, periodontal layers, and alveolar bone. Periodontal diseases are bacterial infections that destroy the attaching fibers and supporting bones that hold the teeth in the mouth. The course has been designed to address the need for skilled professionals to help prevent the occurrence of, and curb the spread of damage already caused by the infection.
M.D.S. Pedodontics or Master of Dental Surgery in Pediatric Dentistry is 3 years post graduate programme. The course focuses on pediatric/adolescent growth and development, disease causality and prevention, child psychology and management, and all aspects of the highly-specialized Pediatric restorative techniques and modalities. The course helps to advice and counsel parents, treat dental injuries like chipped teeth, cavities, gum disease and other infections in the mouth. Most importantly, a pediatric dentist teaches children dental care.
Masters of Dental Sciences [MDS] in Oral Medicine and radiology is a 3-year full time postgraduate course. Oral Medicine and Radiology deal with the study, diagnosis and medication management of Oral and Oro-facial diseases. It emphasizes the concept of systemic diseases in a role of oral sepsis and oral manifestations of systemic diseases with an objective of maintaining proper oral health for general health. Oral diagnosis is the art of identifying the diseases, defects dysfunction deformities by scientific methods. Radiology is included in this specialty and it is the study of radiation and its uses in taking radiographs for oral and or facial diseases. The interpretation of these radiographs helps in proper diagnosis.
MDS in Oral & Maxillofacial Pathology & Microbiology is a 3 year postgraduate Dentistry course. The Course includes the study which deals with the nature, identification, and management of diseases affecting the oral and maxillofacial regions. It is the science which investigates the causes, process and effects of these diseases. Oral pathology department is to provide basic knowledge of Normal Dental Anatomy and Histology and its pathological form for improved understanding of the oral diseases and increased skill in its diagnosis.
Ph. D in Dentistry is a 3- 6 year Doctorate botany course. The duration of the program is minimum of 3 years from the date of registration and maximum of 6 years. In this course, students various forms of treatments including Dental materials, Surgical procedures, Oral histology, Pedodontics, Radiology, Dental anatomy, Oral Pathology, Oral medicine, Community dentistry, etc. Students also study function, structure, and path function of stomatognathic and craniocervical region. The curriculum includes Oral pathology, Orofacial pain, advanced radiology, Advanced Oral medicine, and Drug interactions in Dentistry.
The Bachelor of Science in Nursing (B.Sc. Nursing) is a 4 years undergraduate medical programme. Nursing education is monitored by the Indian Nursing Council (INC), the programme focus on developing critical care, advanced thinking skills, proficiency and values necessary for the practice of professional nursing and midwifery. The programme prepares students to become responsible citizens by following a code of moral values and conduct at all times while fulfilling personal, social and professional responsibilities. B. Sc. Nursing programme involves classroom study, projects and assignments that enable students to gain practical knowledge of their learning. After the completion of the course, the students compulsorily need to do a six-month internship to experience real-world clinical settings and learn from them.
M.Sc. in Medical Surgical Nursing is a 2-year full-time postgraduate program. As an educational discipline, medical-Surgical Nursing includes superior examine in the discipline of nursing consisting of best practices, study’s methodology, statistical expertise, and control strategies that shape the area.
M. Sc Child Health Nursing (Paediatric Nursing) is a 2 year postgraduate course that caters child care needs. The program makes use of a purposeful and child-centered approach that realizes this need of children's offerings. The path concentrates on expanding research and evidence-based assessment skills among students.
M.Sc. Obstetrics and Gynecology (Maternity Health Nursing) nursing are related fields of nursing where the practitioners deal with the reproductive fitness of women. They assist ladies during pregnancy, labor and childbirth, as well as women with health troubles with their reproductive system.
M.Sc. in Community Health Nursing is a 2-year postgraduate path. This path offers a practice-orientated program of examine for nurses looking for a community qualification recognized by using the Nursing and Midwifery Council. Students enrolled to the route are exposed to superior classes in both nursing and public health fields, and offered the opportunity to expand a heightened knowledge of public policies, theories, standards, and their application to actual-life instances.
M.Sc. in Mental Health Nursing (Psychiatric) is a 2 Years postgraduate Neurology course. During this path, students will study ethics, counseling concept, profession development, diagnostic strategies and group Counseling. The main consciousness of the course is in clinical practice in an area of mental fitness carrier Provision.
Diploma in Pharmacy or D. Pharm, is a 2-yr full-time diploma course divided into 4 semesters. The course has been designed to prepare candidates to work under the supervision of a licensed pharmacist in hospitals, community pharmacies, and other pharmaceutical related fields. The course is designed to familiarize candidates with the basic concepts of pharmaceutical science. D.Pharm to prepare students with the necessary skills and academic knowledge required for entry-level positions in retail pharmacies as well as pharmaceutical companies.
A Bachelor of Pharmacy (B Pharm) is a 4 year undergraduate degree in the field of pharmacy. This degree is a prerequisite for registration to practice as a pharmacist. The course trains students to understand the properties and impacts of medicines and developing the skills required to counsel patients about their use. B Pharm holders can work in several fields such as being a pharmacist, patient counselling, doing further studies such as master's degree, working in a university as a lecturer, or working as a drug information specialist. After the completion of this degree, the students can practice as a Pharmacist. Pharmacists can work in a range of industries related to the prescription, manufacture & provision of medicines.
Bachelor of Physiotherapy is an undergraduate program which is of 4.5 year duration including compulsory six months of clinical internship. This program involves the science of physical movement aimed at preventing disease and disability. Physical Therapy Programs provide core skills like manual therapy, therapeutic exercise and the application of electro physical modalities, to the prospective students. There are various Physical Therapy Colleges which offer Physiotherapy Courses. Physical Therapy Degree Course is especially meant for those who have compassion for the sick or injured. Physiotherapy is very challenging and demanding as one may need to work for long hours and have tremendous patience as some patients may not respond to immediate treatment.
MPT in Orthopaedics is a 2-year full-time postgraduate course. Orthopaedic physical therapy includes treatment of the musculoskeletal system (which is made up of the muscles and bones of the body) that has been subject to injury or trauma. This includes sprains, strains, post fracture, post-surgery and repetitive injuries. The areas of the body include the neck and back as well the extremities. Orthopaedic surgeons use means of both, surgery and non-surgery to treat and cure musculoskeletal problems, injuries to sportspersons, degenerative diseases, infections, and tumours and congenital disorders. All the matters of muscles and bones in the human body are dealt with by orthopaedic surgeons or specialists.
MPT Neurology or MPT Neuro science is a 2 year postgraduate Physiotherapy course. Neurological physiotherapy is the treatment of patients who have a neurological disorder. Neurological disorders are those affecting the brain, spinal cord and nerves; such as stroke, MS and Parkinson's disease. Due to the unique nature of neurological injuries, neurotically patients require special care during their rehabilitation. This program provides a unique opportunity for physiotherapists who wish to develop and extend their knowledge base and professional expertise in the field of neurological rehabilitation. The course is beneficial in many fields after its passing.
M.P.T. Cardio respiratory is a 2 year postgraduate Physiotherapy course. Cardio respiratory is science that pertains to or affects both the heart and the lungs and their functions. Course serves for the patient affected with respiratory problems that need Bronchial hygiene, Airway clearance, Secretions removal and patients posted for cardio-Thoracic surgery and other surgeries to minimize the Chest complications using Manual and Independent Chest PT techniques. The courses also contain a detailed study of various kinds of actions that can be performed on the heart to make it more efficient and healthy in its working. They work with all ages from premature babies to older adults at the end of their life. Physical therapists are pioneering new management techniques for non-organic respiratory problems like hyperventilation and other stress-related disorders as well as leading the development of cardio-pulmonary rehabilitation and non-invasive ventilation.
MPT in Paediatric Neurology is a 2 year postgraduate Physiotherapy course. Paediatric neurology is focused on the development of the health of children in early detection of problems and treatments, especially with concerns such as body postures and main motor skills. There is a physiological difference in the body of an adult and child therefore in the treatment of kid or adolescent, such as durian are considered like trauma injuries or musculoskeletal problem, flat feet, gait problem, torticollis, hypermobility, arthritis, knee problem in the bone and joints. Paediatric Physiotherapy also takes care of development disorders and brain and nervous system complications.
Master of Physiotherapy in Sports is a 2 year postgraduate Physiotherapy course. Sports physiotherapy deals with injuries and issues related to athletics. The course deals with injuries and issues related to athletics. Experts in sports physiotherapy may do research, help athletes recover from injuries, and provide education and resources to prevent problems. The aim of physiotherapy is to treat and fully rehabilitate the athlete post-injury, post-operatively, to prevent further injury and to return the athlete to a sport in the shortest possible time. The course is career orienting in nature that provides many opportunities after its passing successfully.
M.P.T in Hand Rehabilitation is a 2 year post graduate course. Hand conditions may influence bones, muscles, ligaments or different tissues of the hand. These conditions might be innate (present during childbirth) or may grow sometime down the road because of injury, abuse or different causes.
Hand conditions incorporate, however are not constrained to, breaks of the bones of the hand and wrist, hand joint inflammation, tendonitis, pimples and nerve pressure, for example, carpal passage disorder. Different authorities might be engaged with medications of hand conditions, including physical and word related specialists, oncologists, orthopedic specialists, plastic specialists, neurosurgeons and other social insurance suppliers.
MPT in Obstetrics and Gynaecological Physiotherapy is a 2 year postgraduate professional physiotherapy degree level course of study in India. This study was designed to assess the attitude of obstetricians and gynecologist toward involving physiotherapist in the management of patients with obstetric and gynecologic conditions. The course of study is suitable for those candidates wants to increase their knowledge for accelerating their career by exploring and acquire a critical understanding of Physiotherapy in Obstetrics and Gynecology, The course of study is designed to provide in-depth knowledge, information, techniques and about the activities associated with Physiotherapy, in a comprehensive manner. The study is focused on theoretical and practical aspects and principles techniques in an academic discipline such as Electrotherapy modalities in Obstetrics, Episiotomy, and its Physiotherapy Management, Aerobics, Weight Training in Pregnancy, Diastasis Recti, Puerperium and its Physiological Changes, Types of Assisted Delivering Gestational Trophoblastic Disease, Clinical Obstetrics, Relaxation Techniques, Dyspareunia and its Physiotherapy Management, Pre, and Post Physiotherapy Management for Gynaecological Surgeries.
M.P.T. Community Physiotherapy is a 2 year postgraduate Physiotherapy course. The course will provide a foundation for professional development upon which the individual can build his/her future success. This will be achieved through a good understanding of the principles of lifelong learning and its application within the workplace. The program focuses on extended physiotherapy skills, communication skills, clinical management, health promotion and primary care. The course will provide a foundation for professional development upon which the individual can build his/ her future success. This will be achieved through a good understanding of the principles of lifelong learning and its application within the workplace. The course is career/job providing in nature after its completion.
B.Sc. physician Assistant is a 3 year undergraduate medical course. Physician Assistant is a skilled fitness care expert who is qualified with academic and scientific training to provide fitness care services under the supervision of a specialist.
Physician Assistants are formally trained to provide diagnostic, therapeutic and preventive health care services in all the medical specialties, as delegated by a physician. Working as members of a health care team, they collect medical histories, initial examination of the patients, order for laboratory tests and x-rays and assist the doctors for diagnosis and treatment.
The Physician Assistants work in different areas such as outpatient wing, wards and critical care units, operation theatres and other super specialty units like, Cardiology, Pulmonology, Nephrology, Neurology, Gastroenterology, Urology, Orthopaedics , Oncology, Endocrinology , Head and Neck and Plastic Surgery, Catheterization labs, Coronary care units, Organ Transplant units and trauma care etc.
B.Sc. Medical Laboratory Technology (MLT) is a 3 year undergraduate medical Lab technology program. Medical Laboratory technology program also known as medical laboratory science is an allied health profession that is concerned with the remedy, prognosis and prevention of disease through using clinical laboratory tests. During the program these tests help candidates to examine and diagnose, detect and treat illnesses. Moreover the program deals with the collecting of information's sampling, reporting, checking out and documentation.
B.Sc. Renal Replacement Therapy & Dialysis Technology is a 3 year undergraduate degree. The course is designed to prepare students to administer haemodialysis treatments for patients with renal failure, under the supervision of a nurse or physician. Dialysis technicians monitor and operate dialysis machinery, which removes waste and excess fluids from the blood of patients whose kidneys are no longer functioning properly. In addition to preparing patients and monitoring dialysis treatment, dialysis technicians also prepare post treatment reports. They also work on protocols for equipment evaluation and training materials for patients and staff. Dialysis technicians generally work under a physician or nurse's supervision, usually in a hospital, clinic or home-dialysis program.
B.Sc Operation Theatre and Anesthesia Technology is a 3 year undergraduate degree course. Operation Theatre and anaesthesia technician is an allied healthcare worker who assists with the administration and monitoring of anaesthesia and has an extensive knowledge of anaesthesia techniques, instruments, supplies, and technology.
Anaesthetic technicians are involved with all aspects of the delivery of a patient's preoperative (The period, Before, during and after the surgery) anaesthetic care, taking into account the patient’s religious and cultural beliefs and respecting their right to medical privacy and dignity at all times. Anaesthetic Technician also provides a key role in the emergency resuscitation of patients.
B.Sc. in Respiratory Therapy is a 3 year undergraduate degree course. Respiratory Therapy is a relatively new branch of Allied Health Sciences and a profession devoted to the scientific application of technology in order to assist in the diagnosis, treatment, management and care of patients with cardiopulmonary and associated diseases. Respiratory therapy curricula typically cover coursework related to the health, function and treatment of the heart and lungs.
B.Sc. Radiology and imaging technology is a 3 year undergraduate course that produces clear and accurate images of the body that enable physicians to diagnose and treat medical conditions. Technicians operate sophisticated equipment that includes X-ray, CT scan, MRI and mammography. By guiding patients through each step of their medical imaging procedures, these specialists ensure the production of high quality images.
B. Sc. Optometry is a 3 year undergraduate degree course which deals with the examination, diagnosis, treatment and management of diseases and disorders of the visual system. It is a vision care science. One can also define it as the science of eye equipment (including lenses and spectacles) which is imbued with the idea of improving the vision of the human eye and remove all kinds of obstacles of sight which an individual may experience.
B.Sc Cardiac Perfusion Technology is a 3 year undergraduate course. Cardiovascular perfusion is the science of providing extracorporeal circulation in order to artificially support and temporarily replace a patient’s respiratory and circulatory systems. Clinical Perfusionists are expert members of the cardiac surgical team, and provide life saving support of patients requiring extra corporeal circulation, including but not limited to major cardiothoracic, vascular and transplant surgeries, as well as support of the critically-ill patient.
B.Sc Clinical Nutrition is a 3 year undergraduate course. The course contains comprehensive reviews, clinical research, case observations, and other types of papers written by experts in the field of nutrition and health care practitioners involved in the delivery of specialized nutrition support. Clinical nutrition is concerned with therapeutic uses for nutrition, usually in medical settings as part of a complete health care program. Clinical nutritionists create effective nutrition plans that work toward health outcomes such as disease prevention and treatment, strengthening of the immune system and nourishment of those unable to care for themselves.
B.Sc. Emergency and Trauma Care Technology is a 3 year undergraduate course. The course deals with the knowledge of disease processes and specific bedside procedures and technical skills to handle cases considered critical/ emergency/ traumatic. On completion of the course, students will be experienced in handling serious medical and surgical emergencies including cardiac, neurological, polytrauma and paediatric emergencies.
B.Sc. Medical Record Technology course is a 3 year course which meant to train students to become a medical record Technician or Health Information Technician professional. It’s an administrative job which involves keeping and maintaining records in medical office settings like hospitals, clinics, nursing homes and doctor's office.
B.Sc. Medical Sociology is a 3 year undergraduate Sociology course. Medical sociology is the sociological analysis of medical organizations and institutions; the production of knowledge and selection of methods, the actions and interactions of healthcare professionals, and the social or cultural effects of medical practice. The field commonly interacts with the sociology of knowledge, science and technology studies, and social epistemology.
B.Sc. Cardiac Technology is a 3 year undergraduate course divided into 6 semesters. Cardiac Technology is an allied course in medicine. Cardiac Technologists assist physicians during invasive cardiovascular testing; a tube is inserted into one of the blood vessels that carry blood into the heart.
B. Tech in Information Security & Digital Forensics is a 4 year undergraduate course which imparts knowledge about the body of technologies, processes and practices designed to protect networks, computers, programs and data from attack, damage or unauthorized access. Cyber forensics is a branch of digital forensic science pertaining to legal evidence found in cyberspace and digital storage media. The programme addresses the underlying need for cyber experts as the country is heading towards an internet explosion mostly fueled by e-commerce, e-banking, e-governance and social media. The programme trains students to maintain a digital document chain for any structured investigation to find out exactly what happened on a computing device and who was responsible for it.
B.Tech Computer Science and Engineering is an undergraduate 4 years course on practical and theoretical knowledge of computer hardware and software. It deals with designing and developing computer software and hardware processes. The students will be able to understand, learn and use different programming languages, digital and analogue electronics, networking and telecommunications etc.
B.Tech. Software Engineering is a 4 year undergraduate Software Engineering course. Software Engineering is a profession dedicated to designing, implementing, and modifying software so that it is of higher quality, more affordable, maintainable, and faster to build. It is a "systematic approach to the analysis, design, assessment, implementation, test, maintenance and re-engineering of software, that is, the application of engineering to software. Software engineering has broadly been defined as the application of a systematic, disciplined, quantifiable approach to the development, operation, and maintenance of software.
B.Tech Artificial Intelligence and Data Science is a 4 year undergraduate program which is a specialized branch of Computer Science and Engineering. The course provide an in depth knowledge of building human-level thought processes through the creation of artificial intelligence (AI) is the state-of-the-art in Computer Science. Intelligent machines are influenced by emerging technologies, smart devices, and sensors, computing power, faster data processing, huge storage and human-machine interaction capabilities. Data Science is an interdisciplinary field with the ability to extract knowledge/insights from data - be it structured, unstructured, or semi-structured data. Twinned with Artificial Intelligence, more efficient solutions to find meaningful information from huge pools of data are possible today, with data from multiple sources - sensors, images, streaming video, satellite, medical imagery and the cloud.
B.Tech Information Technology is an undergraduate 4 years course which focuses on computer technology. Information Technology covers both software and hardware sectors like Devise, development, execution, support and running of computer-based information systems. It helps to generate, manage, store, communicate, and flow information.
B. Tech IT and Business Computing is a 4 year course. A broad term for a commercial entity involved in the computer industry. Examples of computer businesses include hardware and software manufacturers and retailers, software developers, PC repair and service companies, computer training firms, computer networking businesses, computer consultants and more. The skills that you will learn in this course will enable you to embark on a range of careers, with examples of roles including: Systems Analyst, Programmer, Database Developer, Database Manager, Test Engineer, IT Support or management of web based systems, new developments and projects.
B. Tech IT and Media Entertainment is a 4 year course. This course teaches the fundamentals of media representation, storage, communication, and processing by digital means, with an emphasis on audio, still images, and video media. Students will learn to analyze media technology in terms of critical properties such as resolution, noise, bandwidth, latency, and computation.
B. Tech IT and Visual Communication is a 4 year course. Visual communication is described as the conveyance of ideas and information in forms that can be read or looked upon. Visual communication in part or whole relies on vision and is primarily presented or expressed with two-dimensional images, it includes signs, typography, drawing, graphic design, illustration, color and electronic resources.
B.Tech Electrical & Electronics Engineering is a 4-year undergraduate course which studies the application of electricity and electronics. The course focus on the fundamental knowledge in core disciplines like control systems communications frequency design signal processing microelectronics microprocessors power generation and electrical machines. Electrical & electronics engineering not only involves in electrical appliances, but also involves in computer, electronics, communication and mechanical fields.
B.Tech Electrical Engineering & Information Technology is a 4 year course. Electrical Engineering and Information Technology is a department of engineering which deals with the application of electricity science in practice. There are fundamental differentiation between an energy-oriented, physical-constructive-material-oriented and an information-oriented focusing. The first one is concerned with the generation of electricity in power stations, with the transport of electricity in cables and open wires and with the utilization of electricity in electrical machines and installations. Another main topic is the planning and realization of electronic components, wiring and sensors to regulate and monitor energy technological systems.
B .Tech Mechanical Engineering is a 4 year Degree engineering course which focuses on production, designing, and operations of machines. The course is designed in such a way, that one would learn theoretical and practical knowledge of different fields that are covered in the study of mechanical engineering. The programme endows students with the basic understanding and knowledge of how heavy tools and machinery work. Mechanical engineers are capable to design everything from new batteries to medical devices and from personal computers, air conditioners, automobile engines to electric power plants. These engineers also design machines that produce these innovations.
B.Tech Automobile Engineering is a 4-year undergraduate degree course. Automobile Engineering is the sub-department of Mechanical Engineering, additionally referred to as automobile engineering or vehicle engineering. B.Tech program in automobile engineering offers with the examiner of numerous engines and their production, electric systems, alternative fuels, protection, economics and high-quality of an automobile. Students need to have significant knowledge and interest in mechanics, electronics, and mathematics as those are critical skills required for making a great boom in automobile Engineering.
B.Tech Robotics & Automation Engineering is a 4 year undergraduate courses that provide a comprehensive educational environment and enable students to gain expertise in next generation robotics and automation systems. By exposing the students work from multiple disciplines and preparing them to think about robotics from a holistic approach. Robotics deals with the design, construction, operation, and use of robots along with the computer systems for their control, information processing, and sensory feedback.
B.Tech. Aeronautical Engineering is a 4-year undergraduate course. The Aeronautical engineering deals with the research, design, development, construction, testing, science and technology of aircraft. Aeronautical Engineering has grown to be one of foremost and overlapping branches of Aerospace Engineering, with Astronautical Engineering being the second one. Aeronautical engineering is a study about the design and structures of an aircraft. It includes realistic and theoretical expertise of materials, assembling components, checking out and renovation of aircrafts. Expert engineers operating in this area should be licensed aeronautical engineers. The course additionally allows students to attain understanding of advanced technology used in aircrafts travelling in outer area.
B.Tech Electronics & Communication Engineering is a 4 year Degree engineering course which focus on principles and designs of underlying hardware systems that are utilized in areas together with telecommunication, power and electronic sectors. It’s far based on studies, design, and development and testing of electronics in numerous systems. B.Tech. ECE is an introductory course for electrical engineering students wherein students look at a chain of core courses together with optional topics which cover the ideas of telecommunications, power and electronics sectors.
B.Tech. Electronics and Telecommunications or Telecom Engineering is a 4 year undergraduate engineering course, deals with core areas such as analogue & digital transmission, video, voice and data reception, electronics, micro-processors, satellite communication and analogue integrated circuits. Subjects studied under this degree are digital systems, digital Signal processing, Fuzzy logic and neural networks, VHDL and VLSI, digital communication, embedded system, Microprocessors & micro controllers and microwaves.
B.Tech ECE with Specialization in IoT and AI - in collaboration with IBM is a 4 year undergraduate course. This Course provides an opportunity to the students to learn the insights to the most important technologies driving the modern world namely Artificial Intelligence and Internet of Things.Students will be given 360 degree exposure to various Intel Hardware and Software platforms that are used in Industry for AI and IoT development.
B.Tech Instrumentation & Control Engineering is an undergraduate 4 years course which focuses on the practical training of principle and operation of measuring instruments, which are utilized in the planning and configuration of automated systems. This branch of engineering deals with measurement and control of process variables during a production process. Being an integral a part of industrial automation, Instrumentation and Control Engineering finds itself at bottom of all modern industries. A variety of recent industrial settings like energy production, manufacturing, food production, environmental health and mining use systems managed, designed and built by Instrumentation and Control Engineers. The specializations on offer during this discipline are control theory ,analytical and biomedical instrumentation, process control and instrumentation, microprocessors and microcontrollers, and circuit analysis.
B.Tech Electronics & Instrumentation Engineering is a 4-year undergraduate course, it is a combination of Electronics and Instrumentation Engineering, in particular combining the electronics component for sensing with instrumentation engineering. This specialized department of engineering allows creating, assembling and maintaining measuring and managing devices and systems found in manufacturing plants and research institutions. Electronics & Instrumentation Engineers carry out a variety of tasks such as measuring, conducting research, installing, developing, testing, maintaining and designing various instruments used in the industry. Computer-aided processes and automation techniques help engineers to formulate ways to control these systems.
B.Tech Biomedical Instrumentation engineering is a 4-year undergraduate degree course practices and design in medical and healthcare business. The amalgamation of the principles and style concepts of engineering with medicine and biology for healthcare purposes has led to the evolution of a replacement and innovative field of study called Biomedical engineering. Biomedical Engineering is an up-and-coming field that mixes the problem-solving skills of engineering and medical sciences to develop long-term solutions for advanced healthcare and treatment.
B.Tech Bio-Technology is a 4-year undergraduate degree course. Biotechnology is claimed to be a combination of biology and technology and it's an applied science. It is the study of biological processes and their utilization for industrial purposes like studying microorganisms and utilize the knowledge for development of antibiotics, medicines etc.
B.Tech in Civil Engineering is an undergraduate engineering degree of 4 year duration. B.Tech in Civil Engineering is an undergraduate engineering degree of 4 year duration. Civil Engineering focus on planning, designing , constructing, supervising and maintaining infrastructure which includes essential facilities to modern life like building tunnels , schools, brides , hospitals , airports , sewage systems etc. Also the course study includes protecting public and environmental health as well as improving existing infrastructure.
B.Tech Civil Engineering (IT Enabled Construction Tech & Management) is a 4 year undergraduate program. The program equips students with proficiency in tools of civil engineering focusing on effective construction management practices, modern construction materials and techniques. The program trains enrolled candidates in the specialized field of construction of special structures towards accomplishing critical projects within a given schedule and budget.
B.Tech in Chemical Engineering is a four year undergraduate degree. Chemical engineering degree can get you a job in different sectors like Oil, Gas and Energy, Manufacturing and consumer goods, Pharmaceuticals, Chemical Industries and various PSUs. Chemical Engineering is one of the new fields of engineering that includes designing and processing of commercial chemical manufacturing. Chemical Engineers conduct research and develop techniques of producing chemical substances. They need to be skilled in chemistry, fuels, polymers, petroleum & its merchandise and should be nicely familiar with their homes. Chemical engineers are broadly sought-after in rubber, petroleum, fertilizer, and paper manufacturing industries.
B.Voc - Rubber Technology is a 3 year undergraduate course. Rubber Technology is a discipline that deals with transforming rubbers and elastomers into useful products. Rubber technology also deals with the study of rubbers, elastomers and materials such as – latex, natural rubber, synthetic rubber and other polymeric materials. This discipline also deals with the processing of synthetic rubber and elastomers and relevant equipment used to these purposes. Rubber technology discipline has elements of chemistry in it. Chemical bonds, elastomers, vulcanization – these subjects form an integral part of this discipline. Chemical processes, equipment, and properties – they form an integral role on rubber technology.
B.Voc - Production Technology is a 3 year undergraduate program. Production technology deals with the application of engineering and management techniques to simplify production process. The main aim of production technology is to solve problems and challenges arising in the field of production/manufacturing. Broadly speaking, production technology consists of elements of engineering and management sciences. And on taking a closer look, it becomes evident that production technology consists of elements of operations research, production planning, materials management etc.
B.Voc - Industrial Tool Manufacturing is a 3 year undergraduate program. The program will train you in different areas of tool and die making. This trade comes under the category of machinists. Manufacturing industry is well known to hire tool and die makers. Production or manufacturing sector uses different types of tools, dies, molds etc. Tool and die making is closely related to mass production. It involves making molds, dies and fixtures that allow thousands of products to be made easily, quickly and in an affordable manner. Manufacturing firms, automobile industry and other firms involved in production benefit hugely from tool and die making.
M.Tech Computer Science & Engineering is a 2 year postgraduate degree course gives the student in-depth knowledge and skills required in the computer science field. The course covers areas such as safe and secure systems, system integration, distributed and embedded systems, networks, software engineering, algorithms and logic, system on chip and digital systems. Pursuing M.Tech in Computer Science gives students an edge and prepares them for the industry.
M. Tech Computer Systems & Networking Engineering is a 2 year postgraduate program which is a specialized branch of computer Science & Engineering .The course focus in the discipline of network support, foundational mathematical skills, algorithmic principles and computer science theories applied in the modelling and design of computer- based systems. The program is designed to equip students with proficiency in a range of types of computer networks, technologies, and programming in computer systems.
M. Tech. Software Engineering is a 2 year postgraduate course that mainly focus in the course are the development, designing, modifying and managing the software programs. M.Tech. Software Engineering is a course about the designing and implementation of software programs. It is an engineering course which specializes in the software development areas where students are taught the in-depth knowledge of topics like software development methodologies, software designing and also software management.
M.Tech Information Security and Cyber Forensics is a 2 year postgraduate Forensic Science programme. The goal of this course is for students to maintain an appropriate level of awareness, knowledge and skill to allow them to minimize the occurrence and severity of information security incidents. The Cyber Forensics and Information Security program combines the disciplines of technology, business, organizational behaviour and law. Students learn techniques used to detect, respond to, and prevent network intrusions. They also master broader concepts such as the responsible use of resources, the appropriate management of risks, and the alignment of information technology with the organization. The course helps to protect the information and information systems from unauthorized access, use, disclosure, disruption, modification, or destruction in order to provide integrity, confidentiality and availability.
M.Tech. in Integrated Digital Entertainment is a 2-year postgraduate programme designed to offer advanced knowledge in modern digital communication and networking techniques. It deals with the analysis, design, development and application of digital communication circuits and networking systems. It also includes the study of technologies that are popularly utilized in creating connections such as Wide Area Networks, Metropolitan Area Networks, and Local Area Networks.
The course also deals with all fundamental networking protocols and a gamut of Internet protocol family. Apart from networking, the course also combines the study of simple network diagnostic software tools. The eligibility criteria for securing admission to the course are the successful completion of B.E. /B. Tech. in a correlated branch of engineering.
M.Tech Information Technology is a 2 year postgraduate program that is a vast study where the program features on the components of design, development, implementation, support and management of computer based information systems. Students are taught about software and hardware both, this program is structured for people looking forward to be IT professionals and to update their technical knowledge by making them familiar with the detailed study and research about the emerging technologies. The program aims at imparting practical as well as theoretical knowledge wherein students also learn about managerial skills which are extremely important for surviving in the competitive IT industry.
M.Tech. Power Systems Engineering is a 2 year postgraduate electrical engineering program offering advanced specialization in power systems. The program covers related specialities such as System Analysis of Power, Planning of Stability Evaluations, Forecasting and Reliability, Power Electronics and Drives, High Voltage DC Transmission, Industrial Electronics and Controls, Wind and Solar Energy Electric Conversion System etc. The course trains students in understanding and operation of micro- processors and micro controllers which form a crucial part of the evolving power system technology.
M.Tech Power Electronics & Drivers is 2-year postgraduate industry-oriented program. The discipline of Power Electronics encompasses a variety of fields within Electrical Engineering, and essentially, techniques in system-level modeling analyses, design, and integration of motor drives. The course covers advanced topics in microprocessors and micro-controllers which are essential components in the domain of Power Electronics engineering.
M. Tech High Voltage Engineering is a 2 year post graduate course. The course deals with the physical behaviour of equipment and systems for production, transmission and use of electrical energy, and with construction and characteristics of this equipment and systems. The major areas of research in high voltage engineering are Design of high voltage power apparatus, estimation of Electrical field strength in power apparatus, Development of methods of detecting faults during impulse voltage testing, estimation of over voltage power apparatus, the study of Micro-arrays and development of Gene chips. The course includes studies and modelling of material properties in electric fields, material ageing, discharges and breakdown in gases, liquids, solids and complicated insulating systems (multi-phase systems). Also, modern high voltage measuring techniques together with testing and diagnostics of different components and apparatus are of importance.
M.Tech Computer Integrated Engineering is a 2 year postgraduate program in Integrated Computer Engineering, focus on the method involved in manufacturing carried on with the implementation of computers. The program gives a broader view into the advanced knowledge of computer application in areas of Chemical properties, metallurgy, advanced materials and thereby emphasizing into the superior techniques utilized in producing highly efficient products. The course is also known as CIM is a computer integrated program which aids students gets an intrinsic view of computer systems used for controlling the whole production process. The program combines functions of computer control with digital engineering to process the automation of producing plant.
M.Tech Industrial engineering is 2 year industry-oriented program. Industrial Engineering is one of the branches of engineering, related to the development, improvement, implementation, and evaluation of integrated systems of knowledge, equipment, material, processes and people. Students are taught advanced lessons in the design and installation of integrated systems and materials, and equipment and processes for increasing the productivity of goods, and detailing optimum standards of quality which are economically viable. These engineers are concerned with planning, measuring, and controlling all activities within the organization, besides designing the production process for a product.
M.Tech CAD/CAM or Master of Technology in CAD/CAM is a 2 year postgraduate programme. CAD here stands for Computer-Aided Design and CAM stands for Computer-Aided Manufacturing. Thus, the term CAD/CAM implies that an engineer can use the system both for designing a product and for controlling manufacturing processes. Master of Technology in Computer-Aided Design/Computer-Aided Manufacturing Course provides knowledge and skill development in applying computer and scientific principles related to solving engineering and manufacturing problems. The syllabus for the course is divided into four semesters and its career orienting in nature.
M. Tech Mechatronics is a 2 year postgraduate Information Technology programme. Mechatronics is designed to provide students with a formal qualification in engineering at the master’s level. Mechatronic engineers blend the disciplines of mechanical engineering, computing and electronics to create a huge range of products. The course emphasizes industry interaction, featuring guest lecturers in the areas of project management, intellectual property, and ethics and patenting. Mechatronics is the synergistic combination of precision mechanical engineering, electronic control and systems thinking in the design of products and manufacturing processes. It relates to the design of systems, devices and products aimed at achieving an optimal balance between basic mechanical structure and its overall control.
M.Tech. Energy Engineering is a 2 year postgraduate Energy Engineering course. Energy engineering is a wide field of engineering concerning with energy efficiency, energy services, facility management, plant engineering, environmental compliance and alternative energy technologies. This course deals mostly with the energy resources, energy conversion, energy conservation, and environmental impacts. Topics to be covered include different types of energy resources and their uses, different types of energy conversion technology such as fuel cells, thermoelectric, and solar energy conversion, and energy conservation technologies such as pinch technology and cogeneration.
M.Tech Design engineering is a 2 year postgraduate program that aims to prepare the students for leading roles in Research & Development or Design functions of Engineering Industries. M.Tech Design engineering is focused on the mechanical aspects and modern practices of design and its applications. The stream offers subjects such as Advanced Solid Mechanics, Theory of Mechanisms, Theory of Vibrations, Concepts of Engineering Design, and many others.
M.Tech Thermal Engineering is a 2- year postgraduate course ,involves real-time applications of fluid flow and heat transfer in Thermal Energy Systems, Cryogenic Engineering and Refrigeration & Air Conditioning etc. Candidates are trained in design, development, and simulation and to explore new areas in Thermal Energy Systems and allied sciences. The first two semesters of the course involve theoretical subjects & laboratory sessions, while the third semester is about theory & project work and the fourth semester focuses fully on project work.
M.Tech Automotive engineering is a 2 year post graduated course. The course aims to train eligible students to design, develop, manufacture, simulate, and maintain vehicles and automobile systems and to enable such engineers to explore new areas and create new avenues in the field of R&D and to focus on developing in such Automobile Engineers new skills in technology and business management. Demand for Automobile Engineers is growing with the expansion of automotive industries and subsequently, vehicle and power industry. With increasing concerns regarding pollution and fuel efficiency, these engineers also set a standard of quality, such as making the vehicle fuel efficiency, reduction in pollution, biodiesel, etc., and using various types of the dynamometer, pollution measuring, and wheel aligning instruments which are incorporated in laboratory practices.
M.Tech Bio Mechanical Engineering is a 2 year post graduate course which is Design biomedical equipment and devices, such as artificial internal organs, replacements for body parts, and machines for diagnosing medical problems. Install, adjust, maintain, repair, or provide technical support for biomedical equipment.
M.Tech Cryogenic Engineering is a 2 year post graduate course. Cryogenic engineering is a branch of mechanical engineering and chemical engineering which deals with cryogenics. And related very low-temperature processes such as air liquefaction, cryogenic engines (for rocket propulsion), cryogenic surgery, et cetera. Cryogenic engineering is important because it plays a major role in modern industry and science. Today cryogenically cooled electrical machines and superconductors are widely used in power generation, instrumentation, transport and some of the newer fields of technology. The course includes properties of cryogenic fluids and materials, refrigeration, cryostat design, instrumentation, safety and properties of HE II.
M.Tech Applied Electronics is a 2 year postgraduate course in engineering, where the students are prepared for advanced career opportunities in Applied Electronics. Applied Electronics engineering focus on the application of electronics in diverse areas such as medicine, manufacturing, consumer applications, and such. The course aims to prepare eligible candidates who can contribute innovative ideas and technological breakthroughs to the nation’s technological machinery. The program is designed in such a way that candidates are able to get employed in industries like manufacturing, broadcasting, entertainment, data communication, multimedia, consulting, research and development etc.
M.Tech. Communication Systems is a 2 year postgraduate Electronics and Communication Engineering course. Communications technology combines the fields of information technology and telecommunications. The program focuses on equipment, devices and technologies that communicate voice, data and multimedia information. Students learn to design, operate, install and service communications systems and equipment to meet the needs of businesses and other organizations. Programs have five fields of specialization: media studies, organizational communication, and government communication, health communication and identity and diversity in communication.
M.Tech in VSLI Design and Embedded system is a 2-year full time postgraduate course focus on the studies of circuits, circuit design, and as the name suggests, very large scale integration circuits. This field of study has emerged from a coalescence of Material Science and Electrical Engineering. The course is structured on the basis of development of hands on skills as well as of the ability to design systems virtually. The VSLI part of the course will focus on hands on skills related to architecting semiconductor devices and circuits, designing systems with the use of embedded components such as CPU, memory, and peripherals.
M.Tech. Biomedical Instrumentation is a 2 year postgraduate Biomedical Engineering course. The program is designed to train biomedical engineers interested in the applications and development of instrumentation used in medicine and biotechnology. Examples include the use of lasers in surgery and diagnostics, sensors for detecting and monitoring of disease, and micro-electro-mechanical systems (MEMS) devices for controlled drug delivery, surgery, or genetics. The course includes human anatomy & physiology, bio-signal acquisition & conditioning, biomedical imaging system, fiber optics and laser in medicine, cardiopulmonary bio-instrumentation, cardiac catheterization & sterilization techniques, clinical & instrumental aspect of nuclear medicine.
M.Tech Process Control Engineering is a 2 year post graduate course. Process Control is the heart of any industry and sophisticated process control and guidance techniques are essential in modern days. Course train the student to plan, design, install, operate, control and maintain complex systems that produce materials. The program enriches the students with theoretical and practical skills that are required in different spheres of instrumentation and control industries.
M.Tech Instrumentation and Control Engineering is a 2 year postgraduate Instrumentation Engineering course. It deals with the field of science or technology and covers one of the main subjects Instrumentation and Control Engineering. First, Instrumentation is defined as the art and science of measurement and control. An instrument is a device that measures and/or regulates physical quantity/process variables such as flow, temperature, level, or pressure. Second, control engineering or control systems engineering is the engineering discipline that applies control theory to design systems with predictable behaviours.
M.Tech electronics and instrumentation is a 2 year postgraduate Electronics program. The course emphasizes practical training in design and development. The students are trained in both hardware and software aspects. The course aims at developing skills in the design and development of electronics and instrumentation systems for different industrial, communication, biomedical and research applications. During the studies, the focus is on more advanced electives such as robotics, biomedical engineering, advanced sensors, Virtual Instrumentation, fibre optic instrumentation, etc. The program enriches the students with theoretical and practical skills that are required in different spheres of instrumentation and control industries. It enables students to pursue a career in the measurement and control of complex industrial & electrical processes.
M.Tech. Biotechnology is a 2 year postgraduate Biotechnology course. It is a field of applied biology that involves the use of living organisms and bio processes in engineering, technology, medicine and other fields requiring bio-products.
M.Tech Industrial Biotechnology is a 2 year full-time postgraduate Engineering course , focus on the application of biotechnology for industrial purposes, including manufacturing , alternative energy and biomaterials. Industrial Biotechnology is the study of enzymes and micro- organisms to make products in sectors such as chemistry, food and feed, paper & pulp, textile & energy. The course is the revised study of genomics, proteomics and bioinformatics. The program also explores areas like bioethics, regulatory affairs and the role of intellectual property in biotechnology.
M.Tech Environmental Engineering is a 2-year full-time postgraduate course, designed to offer to eligible candidates specialization in a wide range of management of water resources, land or air pollution, while at the same time building competence in a particular area of business. The program aims to train students competent business acumen through advanced study of Environmental Chemistry, Environmental Microbiology, Computational Methods, Water Supply Management, Waste Water Management, Municipal Water Treatment, Industrial Water Treatment, Applied Statistics for Environmental Engineering, Environmental Impact Assessment, Industrial Pollution Prevention, Air Pollution Control, Solid and Hazardous Waste Management, Remote Sensing and GIS Application, Ecological Engineering, Environmental Biotechnology , later allowing them to specialize in a chosen area.
M.Tech in Construction Engineering & Management is a 2 year post-graduate programme focus on the advanced process of construction planning and how to ensure efficient and timely implementation of building and construction projects.
Students are imparted advanced learning in Resource Management, Project Management, Risk Management, Construction Optimisation Techniques, Procurement Management and Financial Planning & Procurement. The students are exposed to practical learning by working on real-world projects in the management lab, construction material lab, and quality practice labs integrated with the latest ICT software.
M.Tech Geographical Information System is a 2 year post graduated course. The program covers the aspects surrounding the areas of remote sensing, typographical surveying, GPS Technology, GIS data and much more. They are rendered a platform for gaining a breath and depth of knowledge in the concerned field, along with the characteristics and skills of analysis, assessing computational data, machine learning, genetic algorithms, reading the patterns and its recognition to name a few. M.Tech. Geoinformatics course renders candidates the skills of evaluating the data in hand, interpreting and converting it into a computational figure.
M.Tech Structural Engineering is a 2-year full-time postgraduate course which involves advanced study of components like Structural Mechanics, Finite Element Analysis, Structural Dynamics, Structural Reliability and Optimization, Reinforced and Pre-Stressed Concrete, Steel Structures, Design for Wind And Earthquake, Tall Buildings And Towers, Computer Applications In Structural Engineering, etc. Students are trained to implement such principles through different methods, in analyses of varied sorts of structures, and to gauge force and displacement parameters of such structures.
M.Tech. Chemical Engineering is a 2 year postgraduate course, primarily concentrating on areas such as thermodynamics, transfer operations and process control. It is structured to cover important areas of the scope of this subject, such as the maintenance and design of chemical plants.
M.Tech Petroleum Refining &Petrochemical engineering is a 2 year post graduate course. The programme is to provide graduates with the broad-based training required for sound refining and processing of crude oil. Crude oil and gas are of little use in their raw state. Their value lies in what is created from them: fuels, lubricating oils, waxes, asphalt and petrochemicals. After the course, students will be able to evaluate oil and gas hydrocarbon structures, Learn and understand various separation/fractionation methods employed in refining crude oil, Study secondary petroleum refining processes to improve yields and know-how molecules are cracked by processes like catalytic, thermal and hydrocracking. The course provides opportunities for you to learn about the general economics of the energy sector, oil exploration and production, as well as renewable energy systems. Graduates of this programme will be well prepared to help technology-intensive organisations make important decisions in view of vast amounts of information by adopting, combining, implementing and executing the right technologies.
MS by Research Bio-informatics is a 2 year post graduate course. MS in Bioinformatics program is preparation for careers that involve using bioinformatics in research or in the biotechnology or pharmaceutical industries. In order to be admitted, students need at least a bachelor's degree in a field related to bioinformatics. Bioinformatics is the application of statistics and computer science to the field of molecular biology. The program provides competence in computational biology/bioinformatics by providing training in the areas of molecular biology, information technology, statistics and bioinformatics.
M.S. Software System and Multimedia is a 2 year post graduate degree. Software Engineering provides students with skills that are widely applicable, highly in demand, and richly rewarded. Software engineering is a discipline concerned with the processes, methodologies, techniques, and tools of developing high-quality software systems in a cost-effective manner. Multimedia studies include film studies, television studies, journalism, video production, computer animation, and studies and practices in multimedia, interactive media, and new technologies.
M.S. Automobile Engineering is a 2 year post graduate level course. This area of study and profession deals with design elements of vehicle engineering such as mechanical, electrical, electronic, software and safety. It also deals with modification of vehicles or transport. Masters in Automotive Engineering is a course that further studies these components for professional outcome.
M.S. Production Engineering is a 2 year post graduate level course. Production Engineering is a branch of engineering dealing with the optimization of complex processes or systems. The course focuses on production technology, production systems, and production-related processes. The four areas of concentration within this program are manufacturing technology, Organization, Quality management, and Production-related processes. The course includes Manufacturing Technology, Production Management, Welding & Joining Technologies, Industrial Engineering, and Ergonomics & Work Organization.
M.S. Embedded system is a 2 year post graduated level course. Embedded Systems (ES) are playing an ever-increasing role in our society. These systems can be found in numerous products, such as TV sets and copiers. Embedded systems are hardware/software combinations whose purpose is to control a device, a process, or a larger system. The combination of computer science (software) and electrical engineering (hardware) in these products makes an integrated approach to the development process necessary. This requires a new breed of engineers who can make use of knowledge of software and hardware. Students can specialize in a wide variety of topics ranging from control engineering, integrated circuit design, computer architecture, communication networks, and real-time operating systems to software engineering, and formal methods for embedded applications.
M.S. Bio-Medical Engineering is a 2 year post graduate level course. M.S. in Biomedical Engineering integrates the dimensions of Biology and Engineering to bring about the understanding of the field in depth. The program covers all the aspects involved in Biomedical Engineering starting from molecular biology, body physiology, system level biology and mathematics. Candidates through M.S. in Biomedical Engineering program are trained in different dimensions to mould them as professionals in the field. They are rendered a medium to polish their analytical and interactive skills, communication skills in reading and writing as well as evaluating the changes with a keen eye for detail. The course is designed with the view of educating candidates for gaining advanced knowledge and training in science stream so as to build their career in the field of biomedical engineering.
Ph.D in Computer Science and Engineering is a 3 year course. Student should have cleared a bachelor’s degree with Computer Science as a subject or equivalent to this degree from a recognised University. The study aims to develop a dynamic researcher which enables them to adapt according to the ever changing needs in the field of computer science in the years to come. Research activity spans a broad spectrum of Computer Science and Engineering subjects which include Algorithm Design ,Artificial Intelligence , Big Data ,Cloud Computing ,Computer Architecture ,Computer Graphics, Vision & Game Sciences ,Human Machine Interaction (HMI) ,Machine Learning ,Semantic Interoperation using Ontologies etc.
Ph D Production Engineering is a 3 year Doctorate level engineering course. The course covers the area adapting of construction for production, assembly systems, computer systems for design and manufacturing, preparation and planning of manufacture, modelling of products and processes, simulation, workshop layout and organization, internal logistics, machinery, handling equipment, control technology, industrial metrology, quality, manufacturing engineering processes like casting, powder technology, materials forming, production engineering and optimization, welding, the human factor, system engineering for development and new production methods like rapid prototyping. A production engineer learns more about castings, joining processes, metal cutting & tool design, metrology, machine tools, machining systems, automation, jigs & fixtures, die & mould design with the almost single separate subject in all these above areas.
Ph D in Instrumentation and Control Engineering is a 3 year research course. It is designed to prepare students to take on a wide variety of interdisciplinary courses that focus on principles from mathematics, electrical, electronics, computer science as well as the fundamental electrical, control and instrumentation engineering concepts. Nature of work of an instrumentation engineer ranges from designing, developing, installing, managing equipment that are used to monitor and control machinery.
Ph.D. in Industrial Biotechnology is a 3 to 5-year doctorate course. Minimum eligibility for pursuance of the course is the successful completion of post-graduation in Biotechnology, completed from a recognized university. The course involves an advanced, research-based study of the discipline of Life & Basic Sciences, and allied disciplines of microbiology, and related technology. A biochemist’s role field of expertise can encompass a wide range of scientific topics, including stem cell research, genetic research, immunology, pharmacology, forensics, cancer research, environmental science, and food science. This interdisciplinary program aims at academically exploring biological processes (reproduction, aging, and genetics) in terms of their chemical identity for easier comprehension.
Doctoral Degree in Civil Engineering is a 3 – 5 year course which prepares students to acquire a systematic and critical understanding of a complex field of learning and specialised research skills in core aspects of Civil engineering to advance learning and/or professional practice. Areas of research includes Mining engineering, geomechanics, structural engineering, transport and traffic engineering, water resources and environmental engineering and many more.
Ph.D. in Chemical Engineering is a 3 to 5-year doctorate course, includes advanced coursework in Mathematics (Calculus and Differential Equations), Chemistry, Statistics, Engineering, Macromolecules, Research and Engineering Mathematics, Thermodynamics, Chemical Process Engineering, Quantum Mechanics, Gas Chromatography, Bioengineering, renewable energy, and plastics. Chemical Engineering is the science behind the operation of the modern every-day life items such as food, clothes, cosmetics, detergents, paper, paint, tyres, chemicals etc.
Bachelor of Architecture (B.Arch.) is a 5 years undergraduate program where the course is designed to provide licensed and professional architects who are authorized to try to private constructions and government constructions. Architectural study includes the activity of designing models of building, preparing construction’s blueprint and other physical structure of any land and building. It is a technical course which mainly focuses on the development of the skills like process of construction of commercial buildings, malls, complexes, highways construction, and civil construction by applying their innovative ideas and analytical skills which are required to become an Architect.
B. Design or Bachelor of Design is a 4 year undergraduate Fashion and Interior Design course. Fashion Design is the study of creating original designs in garments, footwear, jewellery, luggage, etc and a study of the ever-changing trends in the fashion industry and market. B. Des. is the study of creating original designs which involve converting artistic talent and creativity in creating products like clothing, textiles, jewellery, footwear and other accessories. B. Des. Degree course also includes a detailed study of the market trends and the related fashion.
M.Arch Interior Design is a 2 year postgraduate program. Students learn to transform space to address aesthetic, social, physical and psychological needs. In conjunction with the integrated studio, the program emphasizes independent research culminating in a master's thesis. The curriculum is structured to teach the fundamentals of interior design, to anticipate and reflect the change in a continually evolving profession and to encourage the kind of exploration and experimentation that fosters lifelong learners who will contribute to the profession and the discipline’s body of knowledge. Degree course which covers the study of organizing, managing and planning of the interiors of homes, offices, retail shops, hotels, airports, exhibition halls, theatres, studios and commercial establishments, etc.
M.Arch Construction Project Management is a 2 year postgraduate Architecture program. Construction Management is a very well picking-up stream of Architecture & Construction World. It is about overall Planning, Coordination and Control of a Project, from Start to End, aiming at its successful completion to meet the Client's & Designer’s requirement within the stipulated Time, Cost and Quality, in order to produce a functionally and financially viable Project. The course teaches you how to integrate multiple professional requirements for bringing construction projects to successful completion, including estimating, cost control, risk, new technologies, project planning, scheduling, negotiation, and labour relations. The coursework also examines how to manage the various types of contractual relationships governing the owner, the contractor, subcontractors, consultants, and architects, as well as the essential skills of bidding, negotiating, handling disputes and claims, devising and implementing strategic business plans, and leadership.
M.Arch. Landscape Architecture is a 2 year postgraduate Architecture program. Landscape Architecture is both an art and a science, concerned with creating places for people. Landscape Architects may use the tools of planning, design, management and analysis in which to conceive of and guide the development of land. Landscape Architecture deals with concerns and concepts related to pure nature, nature-man relationship and man-made environments. Landscape Architecture encompasses aspects such as ecology, environmental up-gradation, industrial landscapes, and wasteland management, urban landscapes, green belts, and cultural and historical landscapes and so on from micro to the macro level.
PhD in Architecture is a 3 - 5 year duration doctoral level course. Graduates of a Ph. D. in Architecture do not enter into the architecture profession and instead apply for teaching and research positions with various organizations and universities. Besides universities, some common employers include building research centers, consulting firms and architectural publications.
Bachelor of Computer Applications is a 3 year undergraduate course which deals with information technology and computer applications. The course imparts knowledge about different computer applications and how to solve and address the problems which arise from a computer and its applications. The course includes subjects such as core programming languages Java and C++, data structure, networking and others. BCA provides various opportunities to the students who wish to pursue their career in IT and software.
BCA Digital Technology is a 3 year undergraduate course. The program has been intended to offer to qualified up-and-comers a blend of specialized and administrative coursework required for managing future difficulties in the innovation and information driven worldwide condition. Information Analytics discovers application over a scope of regions, for example, dealing with complex business issues, extending efficiencies in emergency clinic and medicinal focuses, and reproducing donning difficulties. The program plans to bestow to qualified competitors a joined investigation of business with information examination and quantitative frameworks.
BCA Data Analytics is a 3 year undergraduate course in computer applications. The program has been designed to offer to eligible candidates a combination of technical and managerial coursework needed for dealing with future challenges in the technology and data-driven global environment. Data Analytics finds application across a range of areas, such as taking care of complex business issues, expanding efficiencies in hospital and medical centers, and recreating sporting challenges. The coursework includes components like optimization, computer simulation, decision analysis, statistics, predictive modelling, data mining and visualization, applied probabilistic modelling, artificial intelligence, applications in finance, marketing, supply chain, information systems and economics using these tools.
BCA Financial Technology is a 3 year undergraduate course. Financial technology (fintech) describes new technology that works towards enhancing and automating the delivery and use of financial services. At its core, fintech is utilized to help companies, business owners, and consumers manage their financial operations, processes, and lives better by utilizing specialized software and algorithms that are used on computers and, increasingly, smart phones.
BCA Data Science and AI is a 3 year course. AI is designed to make the professional technically sound in advanced learning systems that are based on algorithm of Artificial Intelligence. Artificial Intelligence is teaching a machine the ability to solve problems using complex algorithms which human beings solve using their natural intelligence. Data Analytics finds application across a range of areas, such as taking care of complex business issues, expanding efficiencies in hospital and medical centers, and recreating sporting challenges.
Master of Computer Applications (MCA) is a 3 year postgraduate courses various aspects of computer applications. The course includes study related to computer languages, application of computer science in IT field, Data Structures, Mathematics involved in computer science, and alike. MCA curriculum is inclined more towards Application Development and thus it has more emphasis on latest programming languages and tools. MCA course includes various aspects of computational theory, programming, algorithm design and optimization, network and database management, mobile technologies, electronics, mathematics, probability, statistics etc. BCA makes a base while MCA adds a specialized touch within the subjects studied in BCA.
Ph.D Computer Application is a 3 – 5 year doctoral course, includes in-depth study related to computer languages, application of computer science in IT field, Data Structures, Mathematics involved in computer science, and alike. The curriculum is inclined more towards Application Development and thus it has more emphasis on latest programming languages and tools. The course study includes various aspects of computational theory, programming, algorithm design and optimization, network and database management, mobile technologies, electronics, mathematics, probability, statistics etc.
L.L.B. or Bachelor of Legislative Law is a 3 year undergraduate Law course. Thus, there are 2 options for Legal Courses - 3 years L.L.B. course for Graduates and 5-year course for Under Graduates. The legal education apex body in India is the Bar Council of India. This Bar Council monitors and regulates the system of legal education in India. Before 1984, the Course was of 3 years duration only. However, upon the suggestion by the Law Commission of India and the Bar Council of India Specialized Law Universities solely devoted to legal education were established. These provided a multi-disciplinary and integrated approach to legal education.
B.A. L.L.B. (Hons) is a 5 year undergraduate Administrative Law professional integrated course. During the course focus of the study is given on Law with specialization in any one subject, along with Arts being the secondary study course. B.A. provides a course of study in general knowledge and intellectual skills. As of Law, it is a set of categorized rules and regulations under which any society or country is governed. By Honors, it is meant that it is a Higher Academic Standard Course as it requires in-depth study of any of the subject matter. The integrated degree course covers the study of various specialized fields of law namely Administrative Law, International Law, Labour Laws, Tax Laws, Corporate Laws, Civil law, Criminal law, Patent law, etc. The B.A. L.L.B. (Hons.) course study is not restricted to the conventional classroom teaching only but it also includes case studies, mock court drills etc.
B.Com. LL.B. (Hons) or Bachelor of Commerce and Bachelor of Legislative Law Honors is a 5 year undergraduate professional integrated course which is a combination of the study of Law and Commerce. B.Com. stands for Bachelor of Commerce, while LLB stands for Bachelor of Law. By Honors, it is meant that it is a Higher Academic Standard Course requiring in-depth study the subject matter studied. The legal education apex body in India is the Bar Council of India. This Bar Council monitors and regulates the system of legal education in India.
B.B.A. L.L.B. (Hons) is a 5 year undergraduate Administrative Law professional integrated course. The course is a combination of the study of Law and Business administration. B.B.A. L.L.B. (Hons.) provides an integrated understanding of the interrelationship of Management Studies and Law in their entirety than in specified areas. Law, it is a set of categorized rules and regulations under which any society or country is governed. By Honors, it is meant that it is a Higher Academic Standard Course because it requires in-depth study subjects studied.
B.Ed. English is a 2 year undergraduate Education course. This course is a two years program which equips the teacher trainees with the latest knowledge and skills in the field of English Language Teaching (ELT). B.Ed. (English) degree study teaches a person about various aspects associated with teaching and aims to provide global perspectives to the professional aspects of ELT.
B.Ed. Tamil is a 2 year undergraduate course. The course is designed for those individuals who wish to contribute in the development of this language and teach the students the same. In the study of this course, the students will understand Tamil History, language background, development, contributions, poetry and prominent authors of this Tamil.
B.Ed. History is a 2 year undergraduate course. History covers the study of the evolution of human civilizations down the ages i.e. from the pre-historic to the present times. History essentially involves recording, interpretation, and analyses of past occasions. The course acquires relevance in light of the fact that the study of History is important for understanding the human civilization and analyzing the earlier cultures of the society.
B.Ed. Geography is a 2 year undergraduate program. Geography is a rich, diverse, and integrative discipline that brings together both the physical and human dimensions of the world. In studying people, places, and the environment, a geographer will emphasize features of the earth's surface and the processes that shape it, the relationship between people and environments, and the connections between people and places.
B.Ed. Political Science is a 2 year undergraduate course. Political Science is the study of the theories and practice of politics, and an analysis of the political systems and behaviors. The course involves a professional study of both national and international political systems. The program familiarizes enrolled candidates in the various systems of governance, political theories, economics, sociology, global politics, international relations, psychology, etc.
B.Ed. Mathematics is a 2 year under graduate degree in the field of Education. This course imparts knowledge about Mathematics and includes topics like Arithmetic, Trigonometry, Algebra, Geometry and other related topics.
B.Ed. Physics is a 2 year undergraduate course. Physics is a natural science that involves the study of matter and its motion through the universe, along with related concepts such as energy and force. More comprehensively, it is the general examination of nature, aimed at examining how the universe carries on. The program covers a wide range of scientific disciplines concerned with the study of General Physics, Mathematical Physics, Mechanics, Chemistry, Electricity and Magnetism, Microprocessor and Computer Programming, Thermal Physics, Numerical Analysis, Quantum Mechanics, Atomic and Molecular Physics, Statistical Physics, Nuclear and Particle Physics, etc.
B.Ed. Chemistry is a 2 year undergraduate course. It involves topics like Organic chemistry, Inorganic chemistry, Stoichiometry, Thermodynamics, Solids, liquids and gases, Fuels and Environmental science. The science teacher has a responsibility of conducting practical, projects, viva, lab assessment and completing the theoretical part of the subject as well.
B.Ed. Botany is a 2 year undergraduate course. Botany or plant biology is a branch of biology that involves the scientific study of plant life. Botany covers a wide range of scientific disciplines concerned with the study of plants, algae and fungi, including structure, growth, reproduction, metabolism, development, diseases, chemical properties, and evolutionary relationships among taxonomic groups. Botany began with early human efforts to identify edible, medicinal and poisonous plants, making it one of the oldest sciences.
B.Ed. Zoology is a 2 year undergraduate course. Zoology deals with the study of animals, their structure classifications and their existence in the environment. This field is divided into several sub-branches such as - the study of fish and their habitats - Ichthyology; study of birds - Ornithology; and study of mammals-mammalogy.
B.Ed. Commerce is a 2 years undergraduate program. The course is majorly focused on the Commerce stream in Bachelors of Education. The main aim of this course is to provide theoretical and practical knowledge to the students in the stream of commerce subjects such as Accountancy, Business Studies, Economics, Physical Education, English, etc. The students can become a commerce teacher in any senior or secondary school after completing the course.
B.Ed. Computer Science is a 2 year undergraduate course. Computer Science is a highly practical field. Computer Science has theoretical and practical aspects. Students who wish to do it should have great teaching skills. They should be able to make a big problem solvable in easy language. It progresses and channelizes to focused streams. In this course, hardware and software skills are inculcated in the students so that they relay the knowledge and skills to their students when they become teachers.
Bachelor of Business Administration (BBA) is a 3 year professional undergraduate degree which is an abbreviated form of the Bachelor of Business Administration. B.B.A. Course is designed to provide basic understanding about Management education and to train the students in communication skills effectively which inculcate entrepreneurship skills. The students are prepared to explore opportunities being newly created in management profession. Business Administration study methodology involves training through practical experience in the form of case studies, projects, presentations, industrial visits, and interaction with experts from the industry.
BBA Financial Planning is a 3 year undergraduate course. BBA financial planning prepares students for careers in financial management, investment brokerage, insurance, and real estate. It also provides an appropriate preparation for students who wish to pursue graduate work in finance or other areas of business. The course covers many important topics such as Mathematics, Economics, International Business, Financial Theory, Accounting, Banking, Corporate Finance and Fund Management.
BBA Cost & Management Accounting is a 3 year undergraduate course. Cost Accounting is a branch of accounting and has been developed due to the limitations of financial accounting. Financial accounting is primarily concerned with record keeping directed towards the preparation of financial accounts i.e., trading, profit and loss account and balance sheet. It provides information regarding the financial positions of business on a particular date. Cost accounting is a set of procedures used in refining raw data into usable information for management decision making, for ascertainment of cost of products and services and its profitability. Cost accounting is a management information system which analyses past, present and future data for to provide the basis for managerial decision making.
BBA - Business Analytics (Associated with IBM) is a 3 year undergraduate course. The program provides useful techniques and skills related to analytics. BBA in Business Analytics also trains students for acquiring experience and knowledge regarding various analytical tools. Business analytics is generally based on statistical analysis and data mining. It involves the usage of a certain set of metrics to analyse the past performance of any organization or company in order to carry out further planning. Students will learn about performance management, business metrics and delivery, data visualisation, etc.
BBA - Financial Management (Associated with TIMES PRO) is a 3 year undergraduate course. Finance is the management of large amounts of money, especially by governments or large companies. The program is to prepare graduates for success in entry-level positions in finance and elsewhere in the business. Subjects include capital budgeting, risk and diversification, assets and liability management, financial derivatives, financial engineering, swaps, options, financial futures and international finance.
A master of business administration (MBA) is a 2 year postgraduate degree that gives theoretical and practical training for business or investment management. An MBA is meant to assist graduates gain a higher understanding of general business management functions. The MBA degree can have a general focus or a selected focus in fields like accounting, finance, or marketing, including relationship managers. To get into an MBA program, an applicant must take the Graduate Management Admission Test (GMAT) and be accepted by the program supported its selection criteria. While MBA candidates can specialise in one among the core disciplines of the degree, like management or finance, many MBA programs allow students to develop concentrations in specific industries.
College provides 14 electives:
MBA Innovation, Entrepreneurship and Venture Development is a 2 year post graduated course. The program comprises of core and elective Courses, skill certification, capstone projects and Action Learning Segments. With an objective to connecting theory of innovation and entrepreneurship with practice and enabling students to acquire skills, this outcome oriented program is designed to deliver in phases and modules. The course enable students to learn to recognize, create and shape a business opportunity, develop leadership and build a start-up team, construct business models, and assess market feasibility for launching new start-ups.
MBA Logistics and Supply Chain Management Associated with CII is a 2 year postgraduate course. focusing on building analytical and managerial skills in the fields of logistics and supply chain. The course caters to a widely-growing field that is becoming essential for companies and markets to survive in today's day and age. Managers in Logistics and Supply Chain sector are required to ensure that products and services reach the consumers who have asked for them. They manage all the operations related to the count and supply of the products that an organization deals in. Regardless of the size of any business organization, they all have logistics managers to keep track of the inventory and accounts receivable. Small organizations just need a single person to manage their logistics and supply chain whereas huge organizations have an entire department dedicated to that wing.
MBA in Business Analytics Associated with IBM is a 2 year postgraduate course which is a multidisciplinary degree, and includes training in technical skills, business fundamentals, management practices, leadership, and communication, in addition to those skills specific to business analytics. The course provides an enhanced understanding of data analytics tools, and how to leverage data insights to make business decisions. Business Analytics is used by Companies to data-driven decision-making. Simply it’s a study of data through statistical and operations analysis, the formation of predictive models, applications used for optimizing techniques, etc. The course comprises of Computer simulation, optimization, statistics, decision analysis, artificial intelligence, data mining and visualization, predictive modelling, marketing, supply chain, applications in finance and many more.
MBA in Financial Management Associated with TIMES PRO is a 2 year post graduate course which is one of the most sought after specialization of MBA. Finance as a subject involves the management, control and review of the collection, investment and resources of money as a capital required for an industrial building, plant and working. In this course, the students are offered the knowledge and skills of analytical thinking, continuous process, concept of managerial decision, maintaining balance between risk & profitability, coordination process and centralized nature.
The course is included with the corporate finance, budgeting, costing, international finance, investment & securities and working capital management. These subjects prepare the students to work with any financial organization.
MBA in Human Resource or (MBA HR) is a 2 year post graduate course that imparts knowledge and training in managing the workforce of the organization. It is known that every organisation has its unique set of values, visions, ideals, norms, working language, systems and methodology. The role of an HR professional is to develop and manage their company's culture, hire best of the talents and retain them. The students are taught about the strategic management, human resource development and legal aspect management. The students are taught about the cultural, social and economic factors that influence employees’ relation.
MBA Financial Planning is a 2 year postgraduate course. MBA financial planning and financial analysis help guide businesses and individuals in making investment choices. Both carry out financial research and analysis, which they use to provide investment suggestions to clients. But analysts and advisers differ in their clientele and in the information they give out. Financial analysts evaluate the economic outlook of different sectors and industries for organizations that wish to invest. Personal financial advisers work with individual clients and focus on a wide range of personal investment needs.
MBA Cost and Management Accounting is a 2 year postgraduate course. Cost management in accounting is a form of 'management accounting' that is designed to help business owners in the prediction of business expenses incurred for day-to-day activities. The purpose of this form of accounting is to avoid going over budget so that businesses can hold onto as much of their revenues as possible. Each company irrespective of its size is always in need of a talented Cost Management Accountant. Management accounting is the process of identifying, analysing, recording, and presenting financial information that can be used internally by managers for planning, decision-making, and operational control.
BBA + MBA + Financial Planning is a 5 year integrated postgraduate course. Financial planning and financial analysis help guide businesses and individuals in making investment choices. Both carry out financial research and analysis, which they use to provide investment suggestions to clients. But analysts and advisers differ in their clientele and in the information they give out. Financial analysts evaluate the economic outlook of different sectors and industries for organizations that wish to invest. Personal financial advisers work with individual clients and focus on a wide range of personal investment needs.
BBA + MBA + CMA is a 5 year integrated postgraduate course. Cost management in accounting is a form of 'management accounting' that is designed to help business owners in the prediction of business expenses incurred for day-to-day activities. The purpose of this form of accounting is to avoid going over budget so that businesses can hold onto as much of their revenues as possible. Each company irrespective of its size is always in need of a talented Cost Management Accountant. Management accounting is the process of identifying, analysing, recording, and presenting financial information that can be used internally by managers for planning, decision-making, and operational control.
Ph.D. in Business Management is 3- 5 year Doctorate zoology course. The duration of the program is minimum of 3 years from the date of registration and maximum of 5 years. The program provides a solid methodological basis, exposure to forefront themes and methods, and the ability to design and implement research projects in business disciplines. Program prepares the candidates to assume a leadership role as a business professional. Designed for students who wish to become scholars with the skills and knowledge to teach, consult or lead this program focuses on business theory, research, and practice. The course of study will incorporate the examination and research of business system and frameworks, authority, leadership, accounting, financial management, economics, social responsibility, and strategy.
M.Phil. in Management program is a 1 year course which designed for students aspiring for advanced research world leading to doctoral level. The course is suitable for students who are interested in research field, corporate firms and in education. The students would be trained for methodological competencies in research work. The program includes theory paper and a dissertation. The course provides the students with knowledge and skills to think systematically for solving problems in the concerned areas. The study helps the students in gaining insight in identifying problems and handling the challenging tasks.
Diploma in Hotel Management and Catering Technology is a Diploma program in Hotel Management of 2 year duration. It has been designed in a manner to train candidates in disciplines of Hotel Management, Hospitality, and Tourism in order to help them acquire leadership and analytical skills in these areas. Candidates are trained to acquire skills needed on the management front by allotting assignments and projects as applied to the industry.
Diploma in Culinary Arts is a 2 year course. Learning to create great food is only one step in a culinary arts program. Students also learn to master kitchen techniques, the evolution of cuisine, the impact of culture on food, and to display leadership and confidence in the kitchen and beyond. Individuals with a diploma in culinary arts can work in any gastronomic industry, as a restaurant manager, a professional or executive chef, as a caterer or a catering director, the head cook of a café or bistro, or as a director for a food distributor.
Diploma in Pastry Arts is a 2 year diploma course. Students in this major prepare to become bakers and pastry chefs in restaurants, bakeries, and other places. Topics of instruction include bread making, cake decorating, counter display, and more. Pastry courses provide in-depth instruction regarding the culinary arts and the hospitality industry with a specialization in Pastry. Subjects include menu design, trends in baking and pastry making and terminology, safety regulations, how to use various kitchen equipment, and sanitation principles.
B.Sc. Hotel Management and Catering Technology is a 3 year course. It is a comprehensive course that combines an extensive educational curriculum with industrial training fully attuned to competitive aspects and requirements of the Hospitality Industry. Hotel management and Catering Technology refer to professional management techniques used in the hospitality sector. These can include hotel administration, accounts, marketing, housekeeping, front office or front of house, food and beverage management, catering and maintenance.
BBA Hotel Management & Catering Technology is a 3 year undergraduate course. It is a comprehensive course that combines an extensive educational curriculum with industrial training fully attuned to competitive aspects and requirements of the Hospitality Industry. Hotel management and Catering Technology refer to professional management techniques used in the hospitality sector. These can include hotel administration, accounts, marketing, housekeeping, front office or front of house, food and beverage management, catering and maintenance.
B.Com International Hotel Management is a 3 year undergraduate course. First, Catering is a multifaceted segment of the food-service industry. There is a niche for all types of catering businesses within the segment of catering. Second, Hotel management refers to professional management techniques used in the hospitality sector. These can include hotel administration, accounts, marketing, housekeeping, front office or front of house, food and beverage management, catering and maintenance.
B.Sc. Bakery & Confectionery is a 3 year undergraduate course. Candidates who wish to enter the world of Bakery and Confectionery can avail for this program which helps in providing a strong base for further study in the field. Aspirants, who have a creatively inclined mind, as well as good interpersonal skills, can benefit from this course. The proficiency to interact with the clients assisting in knowing their requirements and provide them with valuable advice in the matters of Baking is deemed as a beneficial trait for this program.
B.Sc. Culinary Arts is a 3 year undergraduate course. BSc in Culinary Arts is a course for students who wish to train in the various aspects of food preparation, cooking and presentation. In this course, the core focus is on training students on how to cook delicious food while also making it look good on the plate. Apart from that, the course also includes the study of various other related topics such as effectively managing a kitchen, knowledge of different cuisines, restaurant entrepreneurship training etc.
B.Sc. Food Service Management & Dietetics is 3 year undergraduate course. The program in food service management & Dietetics covers the day-to-day operations of restaurants and related establishments that serve foods and beverages. This type of program could benefit those who wish to prepare for a career in restaurants, food service facilities or food distribution services.
B.Sc. Food Science, Nutrition and Dietetics is a 3 year undergraduate course. Food Science, nutrition and dietetics is a vital science in maintaining an overall quality of life in respect to health and wellbeing, and the art of feeding individuals based on their principle which is a growing field and the opportunities and possibilities in this field are endless. The scope of FND extends far beyond the classical study of the physiological and biochemical process involved in nourishment. Most of the diseases these days are the result of the modern life style and are part of today’s dietary habits like processed foods, Junk foods and convenience foods.
B.Sc. Aviation Service Management is a 3 year undergraduate course. Aviation Management deals with the study of airlines, airports and business related to the aerospace industry. Candidates pursuing aviation management course aim at working at high-level positions where they can work for the security of the airport and air traffic control towers. This course covers the basic topics of aviation. This job involves the activity of planning, designing, operating and maintaining aircraft. Aviation Management course provides individuals with the education necessary to oversee the departments of airlines and airports. There is a vast scope for aviation management as it is witnessing new heights every day. India has the third-largest civil aviation market in the world. Ground handling, fleet management, ticketing, international tourism board, hospitality and in-flight services are included in aviation management.
BA Tourism & Travel Management is a 3 year undergraduate course. Candidates are imparted knowledge regarding transportation industry, hotel management and tourist resort planning. In the duration of the course, they also learn skills like Food Service Management, Intercultural Communication, Ecology, Environment and client servicing. All these subjects are the foundation skills for any students who wish to make a bright career after pursing BA in Travel and Tourism Management course.
B.Sc. Tourism and Travel Management is a 3 year undergraduate course. Tourism Management is the study and analysis of the trends in the tourism industry. This course prepares the students with the skills, knowledge, and leadership qualities required to succeed as professionals in the tourism industry. Travel and Tourism is the aggregation of all the leisure, comfort and business travel products and activities provided by suppliers, including the airlines, hotels, car rental agencies, cruise lines, travel agencies, tour operators, gaming casinos, restaurants, railways, motor coaches, and theme parks. The course comprises chiefly fundamentals, history, business statistics, aviation management and business regulatory framework of tourism.
Post Graduate Diploma in Advanced Culinary Arts and Management is a 2 year course that trains a student in food preparation and cooking. Culinary Arts is a subject that prepares a candidate for a career as a Chef in leading restaurants and hotels across the globe. The course of PGD in Culinary Arts is a great choice for any aspirant who is passionate about food and aims to get professional training in the art of food preparation. In a PGD in Culinary Arts course, students are taken through the various subjects involving food preparation techniques, presentation skills, various cuisines, nutrition, food history etc.
Post Graduate Diploma in Pastry Arts and Management is a 2 year course. Students in this major prepare to become bakers and pastry chefs in restaurants, bakeries, and other places. Topics of instruction include bread making, cake decorating, counter display, and more. Pastry courses provide in-depth instruction regarding the culinary arts and the hospitality industry with a specialization in Pastry. Subjects include menu design, trends in baking and pastry making and terminology, safety regulations, how to use various kitchen equipment, and sanitation principles.
Post Graduate Diploma in Confectionery Management is a 2 year course. This program helps in providing a strong base for further study in the field. Aspirants, who have a creatively inclined mind, as well as good interpersonal skills, can benefit from this course. The proficiency to interact with the clients assisting in knowing their requirements and provide them with valuable advice in the matters of Baking is deemed as a beneficial trait for this program.
M.Sc. Food Science, Nutrition and Dietetics is a 2 year post graduated course. It includes the study of Biochemistry, Physiology, Biostatistics, research methods, and investigation into nutrition, human nutritional requirements, food microbiology and principles of food science in the first year and subjects like human nutrition and dietetics, institutional management and food science in the final year. The course mainly comprise of the study of the major topics of Home Science like Food Science, Fundamentals of Resource Management, Foundations of Human Development, Introduction to Fabric and Apparel Science, Foundations of Food and Nutrition, etc.
M.Sc. Advanced Culinary Arts is a 2 year postgraduate course. Culinary Arts is nothing but the art of cooking. A culinary arts course trains aspirants to prepare, cook as well as present food/ meals in an effective and attractive manner. Pursuing courses in the field of Culinary Arts is an ideal choice for aspirants who want to make a career in the field of food and beverage management, kitchen management as well as other hospitality and food related job profiles. Culinary Arts courses inculcate operational, technical and managerial skills in candidates which help them to excel in the culinary sector of the hospitality industry. Master degree in Culinary Arts degree-seeking students gain practical cooking skills by participating in labs and internships.
M.Sc. Advance Bakery and Pastry is a 2 year postgraduate course. Students in this major prepare to become bakers and pastry chefs in restaurants, bakeries, and other places. Topics of instruction include bread making, cake decorating, counter display, and more. Pastry courses provide in-depth instruction regarding the culinary arts and the hospitality industry with a specialization in Pastry. Subjects include menu design, trends in baking and pastry making and terminology, safety regulations, how to use various kitchen equipment, and sanitation principles.
M.Sc. Culinary Management is a 2 year postgraduate course. Culinary management is an educational course that prepares graduates to work on the practical side of running a restaurant. Unlike culinary arts programs, which focus mostly on the cooking aspect of the restaurant industry, culinary management goes beyond food preparation to include restaurant management, human resources issues, safety in the kitchen, menu development, and front-of-the-house issues.
M.Sc. Hotel Management & Catering Technology is a 2 year postgraduate course. M.Sc. in Hotel and Catering Management course equips enrolled students with the skills necessary for running hospitality-based businesses. Through its industry-relevant and academically-oriented curriculum, the program helps students become reflective individuals, adequately trained to function in the dynamic and competitive hospitality industry. Aside from the hotel industry, such professionals are also lucratively hired in the merchant navy, airlines, and cruise ships, etc., and other assorted areas such as Cafeterias, Airline Catering (flight kitchen) and Club management, Cabin Services, Hotel and Tourism Associations, Hospital Administration and Catering, hospitality services in guest houses, forest lodges, resorts, banks, the armed forces, kitchen management catering departments of railways, food and beverage services, etc.
MBA in Hotel Management & Catering Technology is a 2 year postgraduate course. Hotel management deals with the overall administration and management of a hotel, resort or any other hospitality business. MBA in hotel management will train the students to deal with customers in different industries hotels, tourism, airlines etc. Besides this, the program will also cover some important topics such as financial management, marketing management, accommodation management, strategic management and fundamentals of tourism products. Some of the topics covered in this program will also help the candidates improve their presentation and communication skills.
Ph.D Tourism Management is a 3-5 year course. The duration of the program is minimum of 3 years from the date of registration and maximum of 5 years. The program aims at producing human resources with academic as well as management acumen in aspects of tourism planning, development and research to enhance the quality of all tourism activities. The doctoral program will seek to create the highest level of scholarship, innovative research capability and creative writing in the students’ area of specialization.
Ph.D Hotel and catering Management is a 3-5 year course. The duration of the program is minimum of 3 years from the date of registration and maximum of 5 years. Hotel management involves learning management techniques that are applicable to hotel administration, marketing, housekeeping, maintenance, catering, etc. Aside from the hotel industry, such professionals are also lucratively hired in the merchant navy, airlines, and cruise ships, etc., and other assorted areas such as Cafeterias, Airline Catering (flight kitchen) and Club management, Cabin Services, Hotel and Tourism Associations, Hospital Administration and Catering, hospitality services in guest houses, forest lodges, resorts, banks, the armed forces, kitchen management catering departments of railways, food and beverage services, etc.
B.Sc. Mathematics is a 3 year undergraduate Mathematics course. Mathematics is the study of quantity, structure, space, and change. Mathematicians seek out patterns and formulate new conjectures. The degree course is very important and career orienting in nature. It is being provided by many colleges/universities in the country. After completing the course candidates have a lot of job scopes in various areas.
B.Sc. Mathematical Sciences is a 3 year undergraduate Mathematics course. Mathematical science is a broad term that refers to those academic disciplines that are primarily mathematical in nature but may not be universally considered sub-fields of mathematics proper. The first year provides the foundation of Mathematics and Statistics. The second year further develops the fundamental tools of Mathematics and Statistics. Third-year allows specialization into the streams of Pure Mathematics, Applied Mathematics or Statistics. Graduates may find employment in industry and commerce, government establishments, public service, teaching and research.
B.Sc Mathematics with Computer Applications is a 3 year undergraduate course. Mathematics with Computer Applications Program covers the fundamentals of mathematics and computer science. It is specially designed for students looking to a career in computers. The course covers all aspects of computers right from the basic fundamentals of computers to database systems & advanced courses like C++, Java, etc. It aims at preparing graduates for employment in application areas that require substantial input from both these two disciplines.
B.Sc Mathematics with Applied Statistics is a 3 year undergraduate course. Statistics is the study of the collection, organization, analysis and interpretation of data. Applied statistics use mathematical concepts and methods to develop, design and analyze scientific experiments, sample surveys, medical clinical trials, environmental studies, and industrial and business big data systems. It uses mathematical models of variation to enable analysis and forecasting in many industries. It is the basis for successful decision-making and problem-solving in government, business, science, engineering, agriculture and industry. Applied Statistics uses mathematical concepts and methods to develop scientific experiments, sample surveys, medical clinical trials and environmental studies. It uses mathematical models of variation to enable analysis and forecasting in many industries. The degree is flexible, so you can take up to one quarter of your subjects from other disciplines to expand your career options.
B.Sc Financial Mathematics is a 3 year undergraduate course. Financial Mathematics degrees prepare students for applying mathematical methods for solving problems in the field of Finance. Financial Math students use tools like Probability, Statistics, Stochastic Processes, and Economic Theory to predict and plan for the dynamics of financial markets. Graduate careers include investment banking, hedge funds, consulting, brokerage houses, and more.
B.Sc. Industrial Mathematics is a 3 year undergraduate Industrial Management course. Industrial Mathematics is related that what an engineer could design, a scientist could know, or an executive could manage. Subtle interactions, masses of data, and complex systems are all within the scope of the tools and ideas of applied mathematics.
B.Sc. Physics is a 3 year undergraduate Physics course. Physics is a natural science that involves the study of matter and its motion through space-time, along with related concepts such as energy and force. More broadly, it is the general analysis of nature, conducted to understand how the universe behaves. The degree course is very important and valuable as it is job orienting in nature that opens widespread scopes for the candidates after its completion not only in the educational field but also in many other areas.